Canine Ovulation Detector
Waterproof Design
Accurate Date Output of Display
Probe rod with scale Easier to use
Durable Rubber Sheath withWaterproof Function
Replaceable BatteryWhen the LCD show “LB”,re-place the battery
Two packaging spec-ifications
Product Brochure:DOWNLOAD
- Introduction
- Parameter
Introduction
Veterinary Waterproof Canine Ovulation Detector YJ-COD100
Method of use
1. Cleaning: wet the towel with sticky detergent to clean, then rinse, withoutdrying directly use. 2. After the animals are normal, the vulva is cleaned, and the detection rodis inserted into the genital tract until it reaches the cervical opening. 3.Insert 1/3 (about 4cm) for small dogs, 6-8cm for medium dogs, and 10cmfor large dogs. 4. After inserting the specified depth, do not adjust the direction, rotate fortwo times, and press the switch of the handle to read the value. 5. Blink for 5 seconds to get the value, hold the position and press the switchagain to read the second group of values. Three sets of data were taken con-tinuously to ensure the accuracy of detection. At this point, if there is a nu.merical deviation, the two groups should be used as the first criterion, andwhether the animal is still during the reading process should be considered.Take the resting state as the final reference. 6. After use, please clean the instrument with detergent
Parameter
Parameter
|
|||
Net weight:
|
280±10g
|
Maximum humidity:
|
85%
|
Gross weight:
|
436g/887g
|
Length of rod:
|
120mm
|
Display screen:
|
About 2.6 inches
|
Test method:
|
Automatic one time test
|
Measuring range:
|
10-1990.
|
Test speed:
|
3 seconds
|
Operating temperature:
|
0 to 50 ℃
|
Power.
|
One 9V battery, model 6F22
|
Product configuration:
|
Ovulator, outer packing box, qualification certificate, instruction manual
|